CE Approvaled 7W 18V 0.38A mONO Solar Panel

Logo: Customizale; Power customizable: 3W 5W 6W 7W 8W 10W 12W 15W 20W 25W;

Tags:

Description:Solar Panel; 
Part no.: NE-7W-M; 
Techinical parameters: 7W 18V 0.38A;
Material: Fully tempered glass laminated with aluminum frame,junction box(built-in diode);
Cables and connections:
IP grade for connection: IP65;
Supply male and female parts: Length for male cable 150cm and female cable 50cm.

General data

Application: Solar power system,solar lights;

Index  of  protection: IP 65;

Electrical  connection: By wire;

Solar  panel  supply   isolated,  constant  voltage,  input  voltage from  0 to

21 . 6 Vdc,   output  voltage   18 Vdc,    maximum   output   current   0, 42A ,

maximum   power   consumption    7W,    maximum   power  output

7W,  with  plastic  case  and  electrical  connection  by wire.

Product Specification

 

 

A

Panel dimensions(L*W * H):

①280mm*  ②  180* mm* ③  17mm；

B

Punching diameter:   ④6.5mm ；

C

Bracket dimension(L *W * H *T):  ⑤183mm*⑥132mm*⑦15mm*⑧1.0mm；

D            IP65  Female  Harness  Length： ⑨ 500mm;

IP65  Male Harness  Length： ⑩1500mm；

Harness (index of protection ) :  ⑪ IP65;

 

E             Junction  box  (built-in  diode)： ⑫ ;

F            Technical  sticker： ⑬

G

Tolerances  ： +/- 5%；

H

Warranty: 5  years；

I

Life:  10- 15 years；

J

Date:  May 6, 2024；

 

NE-7W-M

Electrical Date

Mono

NE-7W-M

Nominal  peak  power(Pmax)

7W

Maximum  Power Voltage(Vmp)

18V

Maximum  Power  current(Imp)

0.389A

Short-circuitcurrent(Isc)

0.42A

Open-cicuit Voltage(Voc)

21.6

Optimized cell  efficiency

18.5%- 19.5%

Reference  picture

 

Measurement  unit ：mm( millimeter）

 

 

Temperature

Over temperature  protection

No

Working temperature

-20˚ C  to  +  60˚C

Storage temperature

-40˚ C  to   + 80˚C

 

Certificates

 

Conformity  EMC

Tested  acc. to

EN EN EN EN

55032:2015+A11:2020

55035:2017

IEC61000-3-2:2019

61000-3-3:2013+A1:2019

 

Certificate  No.                                                                               XD402247002112379NC-CR

Report  No.                                                                                      XD402247002112379ER

 

Reliability

Life                                                                                                        10- 15 years

Warranty                                                                                           5 years

 

Limits

Operating temperature

-40°C to +85°C

Maximum system voltage

1000VDC

Temperature and Coefficients

 

NOCT

48°C+/-2°C

Current temperature coefficient

%/ K

0.06+/-0.01

Voltage temperature coefficient

mV/ K

-(78+/- 10)

Power temperature coefficient

%/ K

-(0.5+/-0.05)

 

Additional Data

Number of cells and type of connection

2* 18

Dimensions(MM)

L *W * H:280* 180* 17MM

Weight(KG)

7W:1 .0KG

 

Certificates

BST, CNAS, CE, IEC,  RoHS,

Cells

Polycrystalline silicon  photovoltaic cell

 

 

STC：AM1 .5 ， 1000W/㎡ ,working temperature  ：25℃ ,

Humidity：＜80% ，

Basic Cosmetic Specification:

Delaminations  or  bubbles  do  not  form  a  continuous  path  between  any  part  of  the  electrical  circuit  and  the  edge  of module.

Not any cracks, foreign materials or dirt of cells.

No scratch in the glass or the frame.

No pierce in the back sheet.

 

Performance

Use  high  efficiency  and  high  quality  cells,  modules  are  easy  to  install.  It ’ s  good  to  use  in  system  of  making  common electricity, system of making autonomous electricity, communicative area, residential construction and so on.

Use hermetic multifunction junction  box (waterproof grade: IP65)

Have good weatherability, good  hurricane  lamp  and  good  hail  suppression,  it  can  counteract  damp  and  salt  mist,  no influence from geographical environment

25 -year  limited warranty of 80%  power output;  10 -year  limited warranty of 90%  power output;  5 -year  limited warranty of  materials and workmanship.

 

Warning and safety

Installing  solar  photovoltaic  systems  may  require  specialized  skills  and  knowledge.  The  installer   assumes  all   risk   of injury, including risk of electric shock. Module installation should be performed only by qualified persons.

Contact with a large-scale  PV system is potentially hazardous.

Each  individual  module  may  produce  DC  voltages  greater  than  40 volts when the  sufficient sunlight  or other sources illuminate the  module  surface.  When the  modules  are  connected  in  series,  voltage  is  cumulative.  When the  modules are connected  in  parallel,  current  is  cumulative.  High voltage  and  current  could  present  an  increased  hazard  and  may cause serious injury or death. Therefore,  be extremely careful!

The  module  should   be  carefully   unloaded  to   avoid  damage  to   man-made   causes   when  they   are  transported   to installation  locations.

Please carefully check the products are consistent with the list of goods.

Do not attempt to disassemble or discard any components of the  module.

Do not touch  live wires/terminals  located in the  module junction  box.

Keep children well away from the system while transporting and installing mechanical and electrical components.

Do not wear  metallic  rings, watchbands, ear, nose, lip rings or other metallic devices while installing or troubleshooting photovoltaic systems

Do not expose solar module to sunlight that  is concentrated with  mirrors, lenses or similar means.

The  module should avoid  being shaded to  prevent  module  hot spots  at any time of the day,  because  it will  reduce the output  power.

Do not install near firing and flammable material.

Do not stand or step on module although module glass is strong.

Download Product Specification

If you are interested in our products, please contact us.

Contact Us Now